Has the camera on your iPhone 6s Plus become faulty? Now you no longer have to do without your camera, with this OEM camera for iPhone 6s Plus you can now easily replace your camera to a new one.
Has your iPhone 6s Plus camera been worn and scratched? With this iPhone 6s Plus camera you can again take super sharp pictures without it being blurred and scratched.

With this rear camera for your iPhone 6s Plus, you can now replace the camera yourself, so you only need to buy behind the camera iPhone 6s Plus. It's straightforward and easy to replace. This way you only need to buy behind the camera, to replace the camera which is broken.

This rear camera for the iPhone 6s Plus is of the best quality.

OEM implies that the spare parts are high quality. OEM stands for Original Equipment Manufacturer.
Behind the camera for the iPhone 6s Plus is Apple's original quality.
OEM quality spare parts are for those who want the best behind camera iPhone 6s Plus spare part available on the market.

Note that your iPhone 6s Plus has both a front and rear camera. This is behind the camera.

For mounting behind the camera, use:
Repair kit is not included for installation. Find it here

Cheap shed haul kit

Screwdriver kit for iPhone/iPad/PC repair kit JAKEMY

Screwdriver set for iPhone, iPad and Mac

Here is a very quick and simple review. 

Before you mount the camera yourself, we recommend that you watch one of the many guide videos on the web or find a step by step guide with images.

1. You start by turning the iphone up at the bottom.
On each side of the charger entrance sits a screw. Screw them up with a Pentalobe screwdriver.

2. In this step, open the iphone up. (find image to see how to do)

3. If you do not have an Islack/suction cup, it can also be opened up manually. This is done with a simple suction cup. If you choose this method, you may rightly need the opening tool/teardown stick here.

4. At this point, you cannot completely separate the Iphone from each other. It will still be assembled at the top. Set it up from something so that it stands at a 90 degree angle while you work on the Iphone.

5. Once you have opened up your iPhone 6s Plus, use the Phillips screwdriver to remove the two phillips screws from the battery cutlery bracket.

6. Disconnect the battery plug. Here you will need a teardown stick to quietly lift the plug from the motherboard.

7. Remove the front panel's mounting cable bracket. There are 5 phillips screws. Note: If these screws are installed incorrectly, there may be permanent damage to your Iphone.

8. Lift/disconnect the front camera plug, home button, screen connector and digitizer connector. You can now completely separate the front and back.

9. Gently with a tweezers remove any tape that sits over the camera screw.

10. Lift the camera jack up from its place on the motherboard

11. Remove the two philips screws on opposite sides of behind the camera bracket, and remove the bracket.

12. You can now remove behind the camera from your Iphone.