Smart splitter for HDMI which allows you to have a single output sent out on two different outputs. This can be useful in cases where, for example, you need to have the same content on two different info screens, two boards or the like.

This splitter supports 2x full 3D, from one HDMI source, but can also be used to put at the end of a long HDMI cable to regenerate the HDMI signal.

The splitter supports 4K signal, which of course assumes that the HDMI cables and monitors you use do the same. It supports up to 3840X2160/30Hz and has good deep colors 30 bit to 36 bits.

To get the most out of this splitter we recommend having the HDMI cable which act as input does not overwrite a length of 12 meters and that the HDMI cables which act as output do not exceed 20 meters per output. This means that it can be up to 32 meters long.

If you use a 4K resolution our recommendation is different however, here we recommend only input cable of 8 meters and the same with the output cables, 8 meters. So at 4K resolution, this splitter can generate up to 16 meters of connection.

To ensure the best quality, a power cable is included that can be connected to the box using USB. This may be necessary if you use the splitter between two very long cables, as the resistance will be large and therefore a lot of power will be lost.

The splitter has three signaling LED lamps so you can see when the different ports are active. There are LED lights at each of the two output HDMI connectors, and at the power input.

The power cable included is 80 cm long and has USB at one end and micro USB at the other. So you can use an ordinary iPad charger to power your 4K HDMI splitter. Besides being able to be used for this product, the cable can also use for many other devices such as Android smartphones, speakers, etc.